Hi! workshop manual,service manual,repair manual [Sign in] [register]

By Chilton Chilton Asian Service Manual, Edition,…

By Chilton Chilton Asian Service Manual, 2010 Edition, Volume 4: Mazda, Mitsubishi, Subaru, Suzuki (Chilton Asi (1st Frist Edition) [Hardcover] Rating: List Price: unavailable Sale Price: $135.54 (as of 05/30/2017 00:19 UTC - Details) Availability: Usually ships in...

By Chilton Chilton Asian Service Manual, Edition,…

By Chilton Chilton Asian Service Manual, 2010 Edition, Volume 5: Scion, Toyota (Chilton Asian Service Manual (V (1st Frist Edition) [Hardcover] Rating: List Price: unavailable Sale Price: $2,000.00 (as of 06/07/2017 01:31 UTC - Details) Availability: Usually ships in...

Robinair (34288) CoolTech R-134A Recovery,…

The Robinair 34288 CoolTech combines simple operation with superior accuracy. It recovers, recycles, evacuates, and recharges R-134A quickly and accurately. Meets SAE J-2788 standards for accuracy: 95% refrigerant recovery and charging to +/- 1/2 oz. Automatic Oil Drain: A display reminds you to empty the graduated container to show the amount of oil to replace. Automatic Air Purge: Eliminates damaging air without monitoring gauges or opening valves. Automatic Refrigerant Refill: Maintains a user-selectable amount of refrigerant in an internal vessel and signals when it’s time to change supply tank, no monitoring required. .Multilingual Display Refrigerant Management System: Displays refrigerant use and monitors remaining filter life. Prompts appear when 1/3 of filter life remains.

Koyo CRS-16 Track Roller, Standard Stud,…

This Koyo steel stud-type track roller bearing with a screwdriver slot and lip seals handles moderate radial and shock loads in cam- and track-type applications. This track roller bearing, also called a cam follower, has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a nonseparable, threaded stud-type design for through-hole or threaded mounting, a screwdriver slot on the flange end that helps keep the stud from turning while tightening the mounting nut. This track roller is made of bearing steel treated with black oxide for corrosion protection. Lip seals on both sides of the bearing retain grease applied at manufacture and help protect against contaminants, and internal thrust washers made of self-lubricating resin help reduce sliding friction. Its operating temperatures range from -30 to +110 degrees C. All inch-series stud-type track rollers with a screwdriver slot can be relubricated through the flanged end of the stud. Sizes 12 and larger can also be relubricated through the threaded end of the stud and through a cross-drilled hole in the stud shank. Both stud ends accept a standard nominal inch drive-type grease lubrication fitting (not included). All stud-type track rollers come with lubrication fitting plugs for closing off unused holes. This track roller bearing meets American National Standards Institute/American Bearing Manufacturers Association (ANSI/ABMA) standard 18.2 for quality assurance and is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Mosmatic Undercarriage Cleaner – 21in., PSI, GPM,…

This Mosmatic Undercarriage Cleaner makes it easy to clean salt, grease, dirt and debris from under cars, trucks and machinery without using a lift. The low-profile design and stainless steel and rubber casters allow you to reach under the chassis from a comfortable position. High-speed rotations remove debris without scrubbing or harming surfaces. The relaxed-action trigger gun reduces fatigue. Cleaning Width (in.): 19 1/2, Max. PSI: 4,000, Application: Undercarriage, Hose Length (ft.): 6 1/2, GPM: 13.0, Temperature Capacity (deg F): 250, Caster Type: Stainless steel, rubber, Hose Length (in.): 78, Inlet Size (in.): 3/8, Material: Stainless steel

RWM Casters 40 Series Plate Caster, Rigid,…

Our 40 series casters have been used in a wide variety of applications for many years and are the backbone of the material handling industry. The load ratings fit a wide variety of manufacturing and warehousing uses. Nearly every warehouse, freight terminal, manufacturing plant and industrial business uses these types of casters in their operations. The 40 series caster is the same as our standard 46 series casters except for 1-1/2″ wide wheels. The rivet hydraulically compressed kingpin to increase strength of swivel section as compared to staking. Cold formed top plate, yoke and button are all heat treated to prevent brinelling, improve swivel action and increase service life. Load and thrust bearings are hardened and ground and rotate on hardened raceways. Top plate and legs are 1/4″ steel. Legs are formed for increased strength and continuously welded to yoke. All swivel sections are equipped with a lubrication fitting for field maintenance. RWM lubricates all swivel sections prior to shipment. Notched yokes are standard. 1-1/2″ tread wheel. This medium duty caster series is designed for use on scrap bins, parts boxes, dollies and racks. 1/2″ Diameter drilled axle with lubrication fitting provided on all casters to improve ease of lubrication. Mounting plate size is 4″ x 4-1/2″ x 1/4″.

Chilton’s General Motors Buick, Oldsmobile,…

Total Car Care is the most complete, step-by-step automotive repair manual you’ll ever use. All repair procedures are supported by detailed specifications, exploded views, and photographs. From the simplest repair procedure to the most complex, trust Chilton’s Total Car Care to give you everything you need to do the job. Save time and money by doing it yourself, with the confidence only a Chilton Repair Manual can provide.

Multi-purpose Tray by Alex Carseon, for Boots,…

&#9733Protect your floors and surfaces and contain spills!&#9733

Black multi-purpose tray with raised rim to contain water, dirt, and spills.
Raised ridges to prevent mold. Easier to clean and rinse than rugs.

Ideal for boots, shoes, pets, garden, laundry, pantry, car, RV, boat, paint, tools, shelving, water cooler, entryway, kitchen, garage, porch, mudroom, industrial, and many more uses!

Indoor and outdoor storage – Great as a pet food mat or for use under a litter box.
Perfect under a shoe rack or in a closet to keep floors free of dirt. Made of durable polypropylene.

Size: 30 x 15 x 1.2 inches
Color: Black

★ Satisfaction guaranteed! &#9733

Evinrude/Johnson Outboard Shop Manual, 2-40 HP,…

Evinrude/Johnson 2-40 HP Outboards (Includes Electric Motors), 1973-1990
Part #: B732

432 pages

QUICK REFERENCE DATA

CHAPTER ONE / GENERAL INFORMATION
Manual organization / Notes, cautions and warnings / Torque specifications / Engine operation / Fasteners / Lubricants / Gasket sealant / Galvanic corrosion / Protection from galvanic corrosion / Propellers

CHAPTER TWO / TOOLS AND TECHNIQUES
Safety first / Basic hand tools / Test equipment / Service hints / Special tips / Mechanic’s tips

CHAPTER THREE / TROUBLESHOOTING
Operating requirements / Starting system / Charging system / Ignition system / Breaker point ignition troubleshooting / CD 2 ignition troubleshooting (except 2.5 [1987-1988], Ultra 4 and Excel 4) / CD 2 ignition troubleshooting (2.5 [1987-1988], Ultra 4 and Excel 4) / CD2UL ignition troubleshooting (1989-1990–4 Deluxe–40 hp) / Ignition and neutral start switch / Fuel system / Engine temperature and overheating / Engine

CHAPTER FOUR / LUBRICATION, MAINTENANCE AND TUNE-UP
Lubrication / Storage / Complete submersion / Anti-corrosion maintenance / Engine flushing / Tune-up

CHAPTER FIVE / ENGINE SYNCHRONIZATION AND LINKAGE ADJUSTMENTS
Engine timing / Synchronization / Johnson/Evinrude 2 hp, Colt and Junior (breaker point ignition) / 1973-1978 Johnson/Evinrude 4 (breaker point ignition) / Johnson/Evinrude 2.5, 3 hp, 4 Standard, Excel 4, Ultra 4, 4 Deluxe, 4.5 and 7.5 (CD 2 and CD2UL ignition) / 1976-1977 Johnson/Evinrude 6 / 1978-1985 Johnson/Evinrude 5, 6, and 9 (CD 2 ignition) / 1986-1990 Johnson/Evinrude 6 and 8 (CD 2 and CD2UL ignition) / Johnson/Evinrude 9.5 (breaker point ignition) / Johnson/Evinrude 9.9 and 15 (breaker point ignition) / Johnson/Evinrude 9.9 and 15 (CD 2 and CD2UL ignition) / Johnson/Evinrude 18, 20 and 25 (breaker point ignition) / Johnson/Evinrude 20, 25, 28 and 30 (CD 2 and CD2UL ignition)